PLCSafety-PLCVerified · sol.ls-electric.com
Safety-PLC 37 — Synchronization Between I/O Module Cores Error
Critical — power cycle required
CAUSE
Why does it occur?
Synchronization between I/O module cores error
REMEDY · Step by step
How to fix it?
If problem persists when power reinput, ask A/S
Do not reset repeatedly before identifying the cause. Repeated resets while ignoring a trip/alarm can cause secondary damage (IGBT failure, motor winding damage, etc.).
SOURCE
Related manual page
Verified · sol.ls-electric.com
Open PDF ↗XGS Safety Controller (Safety PLC) Manual V1.1 202012 (Eng)
12.5 Error Code List · p.83 · V1.1