InverterH100Verification pending — cross-check with the official manual
H100 In Phase Open — In Phase Open
Trip — immediate stop
CAUSE
Why does it occur?
- One of three input phases is open
- Magnetic contactor fault, input wiring problem, DC capacitor degradation
REMEDY · Step by step
How to fix it?
- Check input-side magnetic contactor
- Check input wiring
- Replace DC capacitor
Do not reset repeatedly before identifying the cause. Repeated resets while ignoring a trip/alarm can cause secondary damage (IGBT failure, motor winding damage, etc.).
SOURCE
Related manual page
CALLBACK
Request an expert callback
A 12-year automation/SI engineer responds directly. Reply within 1–3 business days.