InverteriS7Verification pending — cross-check with the official manual
iS7 Lost Command (Alarm) — Lost Command
Alarm — operational, inspection needed· AUTO-RESET
CAUSE
Why does it occur?
- Warning when PRT-12 Lost Cmd Mode is 0
- Output via OUT31~33 No.12 Lost Command
REMEDY · Step by step
How to fix it?
- Check signal source
- Check analog input or communication line
Do not reset repeatedly before identifying the cause. Repeated resets while ignoring a trip/alarm can cause secondary damage (IGBT failure, motor winding damage, etc.).
SOURCE
Related manual page
CALLBACK
Request an expert callback
A 12-year automation/SI engineer responds directly. Reply within 1–3 business days.